Mac and Windows platforms have graphical interfaces that provide tray or task bar icons.
All platforms have the zerotier-cli command line interface which can be used to join and leave networks and check the status of the zerotier-one service.
sudo
, while on Windows you will need to use an administrator-mode command prompt.Using zerotier-cli
Get your ZeroTier address and check the service status
zerotier-cli status
200 info 998765f00d 1.2.13 ONLINE
Join, leave, and list networks. Remember, ZeroTier networks are 16-digit IDs that look like 8056c2e21c000001
zerotier-cli join ################
200 join OK
zerotier-cli leave ################
200 leave OK
zerotier-cli listnetworks
200 listnetworks 8056c2e21c000001 earth.zerotier.net 02:99:35:84:f9:dc OK PUBLIC 29.152.27.109/7
List Networks Output:
OK
You're up and running on this network!
Requesting Configuration
Negotiating with the network Controller. This could take about a minute. If it takes much longer, see Router Configuration Tips.
Not Found
Typo in the Network ID?
Access Denied
You node needs to be Authorized on this network (via my.zerotier.com). Talk to you friendly network administrator.
Port Error
Something went wrong with the ZeroTier installer.
On Linux, make sure the tun
driver is loaded.
Related articles